Commercial

Protective Coatings

Anti-corrosion, anti-slip, chemical-resistant and hygienic protective coating systems for floors, steel, plant and food-safe environments.

Protection is coating engineering, not decoration. Our protective coatings service specifies industrial systems for the exact duty a surface faces: chemical attack in plant rooms, impact on loading bays, slip risk in wet processing, corrosion on structural steel, or hygiene demands in food production. Every project starts with a duty assessment and substrate testing — moisture, adhesion, profile — because protective coatings fail at the preparation stage more than anywhere else. Systems are then built coat by coat from certified industrial ranges, applied under environmental monitoring, and proven at handover with documented slip, thickness or adhesion testing. Clients come to us to stop rust cycles on plant, keep warehouse floors moving, pass food-safety audits and stretch asset replacement budgets by years. The coating is invisible when it works; we make sure it works.

Why protective coatings

Matched to the threat

Chemical, abrasion, impact, slip, corrosion or hygiene — we specify for the exact failure mode.

Certifiable standards

Anti-slip gradings, food-safe certification and fire-rated options documented at handover.

Fast return to service

Rapid-cure systems reopen floors and plant in hours, not days.

Asset life extension

Coatings that push replacement cycles back by years and cut maintenance spend.

How it works

1
Duty assessment
We establish the chemical, mechanical and hygiene duties the surface must survive.
2
Substrate test
Moisture, pull-off and profile testing to specification tolerance.
3
System build
Primer, body coats and sealers from certified industrial ranges.
4
Controlled application
Applied with environmental monitoring and intercoat inspection.
5
Certification
Slip, adhesion and thickness testing with a documented handover pack.

Questions, answered

Can you coat floors that must reopen quickly?

Yes — rapid-cure epoxy and polyaspartic systems reach full chemical cure in hours, letting warehouses and kitchens reopen overnight.

Do you offer food-area safe coatings?

We apply certified food-contact-safe systems for preparation areas, with the paperwork auditors ask to see.

How is anti-slip achieved and measured?

Aggregate-loaded systems graded to pendulum test values (PTV) for wet and dry duties — specified to your risk assessment.

Can you protect against specific chemicals?

Tell us the chemical cocktail; we specify linings rated for it, from battery acid to vegetable oils.

Do you handle tank linings?

Yes — bund, tank and secondary containment linings with tested film builds and inspection reports.

Commercial

Commercial Spray Coating

Factory-applied finish quality, on site. High-build spray coatings for commercial fascias, framework, plant and architectural metalwork with minimal disruption to your operation.

View service